Description
2 Inch Diameter Copper Pipe To Keg Kit
2 Inch Diameter Copper Pipe To Keg Kit. Trying to connect a 2″ copper tower to a standard beer keg? Well, we have taken out the guesswork and made it simple for you. You just have to solder the copper female to the bottom of the tower and connect to the keg.
Copper pipe to keg kit includes: 2 Inch Stainless Steel Male NPT, 2 Inch Copper Female NPT, 2 Inch Clamp, and 2 Inch O-ring Gasket
All right I’m going to show you how to connect a tower that we manufactured here Mile Hi Distilling. This is a two-inch dual-purpose Tower and this is a standard stainless steel keg. Some kegs look like aluminum but believing they’re all stainless these days and this is a Schanke keg and the Schanke has basically the same kind of connector as we have on our towers so first you buy a tower you get an O-ring and you wet it which I just kind of get a wet enough to stick in the groove on the bottom of the flange. It’s on there good so I’ll feel stay on there and basically you want to try to get it lined up in the center of the top of the keg the part right there it’s a little bit tricky with one person to do this to take the clamp. The clamp goes around it, tighten it down that makes a real good tight seal now you got a nice heavy-duty 16 gallon distiller alright let me show you how to connect the three inch Tower to this we have to put two to three inch connector on here this will expand it out to the three inch flange alright one second here I’ll clamp the two-inch on there first I’ll put a 3-inch gasket on the three inch flange now the 3 inch Tower this is a torpedo tower that we manufacture here Just put that there, again this is kind of tricky to do on one hand but if you do a few times it ain’t too bad little balancing that’s all. that’s how you connect a three inch diameter tower to a beer keg you’ve got to have the two to three inch connector down here alright one more thing I want to show you if you’re making your own Tower we’ve got a copper pipe to keg kit hold on a second. Find room to set this thing down. Copper pipe to keg kit so what you have a standard flange that goes to a two-inch NPT male and take the gasket we’re going to put it under the same way on the 2 inch Tower just that gasket centered put it on there you want to kind of feel the sides here kind of get centered as good as you can and this will make a good tight seal now if you’re making a copper tower and just take your copper tower to this female 2-inch npt you can solder this to the bottom of your tower and your tower will just screw right into the top of here that’s simple and I want to show you something else I got gotcha here we recently got new you lids for our milk cans it’s really cool got dome lids now which everybody knows that you can zoom in on this little bit down here having dome lids helps the vapors get channeled up into the towers so new dome lids fit on there just like the old ones actually the same exact size just clamp on down like so cool I also want to thank everybody for all the great business Mile High is growing more than I can ever imagine it to it so thank you very much
Dave Gordon –
Got my kit today. Very impressed, great quality and workmanship. Thank you. and quick shipping to.
Josh –
I researched every were to some how find a solution to connect my column to my keg. This is much better than having to weld a piece together as it completely takes all of that out of the equation. Would have been 5 stars however the gasket(o-ring) that makes the seal to the keg, gets lost a lot. It is one more thing to watch when attention is often diverted elsewhere. make sure you keep your clamp on during transport and storage as it protects the gasket from getting lot. Other wise well worth every penny
Unknown –
This piece is awesome. It allows me to set up my still in minutes as well as brake it down. The first time I used it, it worked perfectly, and every time since.
Unknown –
This makes connecting and unconnecting the column easy, perfectly simple. It helps to have a third hand but well worth the price. Having the Tri-clamp connection provides an additional versatility to the column.
Unknown –
The adapter worked perfect no leaks and everything came apart easy. Very happy
Unknown –
This piece makes disasembly and cleaning a snap! It takes no more than 10 seconds to attach the tower and about 3 seconds to take it off. It also provides a great seal during operation!
Unknown –
The 2″ is great !
Jesse –
works great!wish i wish could get a female kit.
Unknown –
works like a charm
Unknown –
thank you so much great product just what i was looking for keep up the great work
Dan –
My friend that is helping me with this project,liked this so much that he had me order one for him too,so that he can retrofit it onto his still that he has been using for years.
Sam –
Saved me many hours of cutting, fitting and assembly of an alternate way of adapting a keg to my home made still which may not have worked as well.
Thinking of building a 3″. Will definitely purchase a 3″ model…
kelly –
got what i orderd in a timenle maner sorry for poor spelling i will be back
BT –
The stainless adapter looks like it was made by a master machinist. Fit is perfect. Clamp is fast and tight. Love this. More than worth the price.
Unknown –
This makes every thing easy. It’s made to work together and it gives you the best of both worlds. You can connect a stainless steel boiler to a copper tower. So that you have a solid dependable boiler and still get that copper flavor wiskey. Pluss you can quickly seperate them for easy storage and cleaning.
Unknown –
Just what i needed! Had my colum conectedw with a upside down salad bowl and haf hard time with sealing tight.
Unknown –
This is the perfect product to attach your product to a keg. Allows for quick disconnect and no modification to the keg.
Unknown –
Works like a dream. No worries after this purchase. This is a very nice unit, very high quality in its craftmenship.
Unknown –
worked very well, great shipping time
Howie –
Very nice, Saved me a lot of time and work.
WELL WORTH THE MONEY!!!!!!!
Art –
I bought 2 of these one for the 15 gal Keg and one for the 7.5 gal thumper Keg.
Finally did my water test and boiled the water looking for leaks. These babies kept there seal. only found a few leaks on my copper fittings but thank goodness for my oatmeal and flour past sealed the leaks right up
Unknown –
Excellent parts, fits even the thickest rating of 2″ copper pipe. Great Service! and very fast delivery! using priority shipping. Would recommend this to anyone looking for a sankey keg to copper tower connection.
Unknown –
Could not be any more happy with this kit!!!
Kab –
I always read reviews on other sites and have a hard time believing them. Everyone talks about the great service and quick delivery.
This is no joke with MHD. Awesome products,
Service and you get it quick. I will purchase everything I need from these guys. Thanks MHD
ross ebert –
I cant review the actual fit of the kit BUT shipping and customer service is great. ordered and had my clamp/adapter and o ring in less than 2 weeks. I will be coming back for more parts!
Michigan grown Sweet Corn –
I was building a “Beer stripper” according to a set of plans I found online. After about 6 mos, I finally acquired all the equipment, soldered the joints, bought a used Keg etc..
I built the column and when it came down to the final connection of the 2 main components – I was at a standstill. I looked at all options, from a muffler flange to local beer/wine suppliers – and they had NOTHING!!
I stumbled across MileHighDistilling when looking online and saw the 2″ Copper to Keg kit.. It looked to easy to be true. After placing order the pkg arrived here in MI within 3 days – and when I saw the quality of the parts sent I wondered why they were ONLY $49.00??
The reason I was so impressed is because I was a Tool and Die Maker in the Automotive Industry here in MI. I built small progressive stamping dies, I have made lots and lots of unique 1-of-a-kind steel parts from scratch made on Mills, Lathes, Shapers, grinders etc..
I have turned 1000’s of threads on Stainless Steel parts, But I was so impressed with the quality and the PRECISION FIT of these pieces, I could not have done better myself!!! And that’s saying something – believe me!
I was Especially impressed with the O-ring groove on the mating surface to the Keg flange, there is a very narrow band that needs to line up perfectly – and guess what??
It lines up PERFECTLY!!!
My hat’s off to you guys – You have my very harder to earn – Seal of Approval!!
SALUTE!!
I will not ever hesitate to order parts from MileHighDistilling!! As far as I am concerned – They are as good or better then me making them for myself!!
Thank you!!
Unknown –
Fits like a glove, made my day. Not a lot of work for a perfect fit.
Unknown –
The keg to column kit was an awesome upgrade to my still. I was previously using a homemade setup that was inefficient and a royal pain in the butt. The kit made installing and removing the column from the keg a snap. The pieces were all high quality and were shipped fast. Great service from Mile-HI!!
Kevin –
As a machinist said in an earlier review, this is one hell of a nicely machined part. I’m a quality control manager at a large machining plant and I can attest to this. If you end up needing another copper NPT to pipe fitting, do yourself a favor and buy it here. You’ll have a hard time finding it elsewhere, it won’t be of the same quality and you’re not going to save yourself any time or money. And your talking to a guy that can make one for himself. It’s a great looking product and I can’t wait to hook it up this weekend!
lowell –
needed this to adapt the reflux tower to my home made condensor and worked like it should
Rob C –
It will be the best money you will spend on this conector (High Quality, Im impressed!!!
T. –
Very nicely machined pieces and fits the Keg perfectly.
Definitely buying another one.
Two Coat –
I built my own still head based on plans from Zymurgy Bob. This is the perfect coupling to connect to my new 8 gallon boiler from Mile Hi.
Thanks for being such a great resource.
Unknown –
This piece replaced my old attachment which was home made, it makes my life so much easier!
Unknown –
This product provides a very simple way to connect your 2″ copper column to an unmodified keg. Easy to take on and off. You will need PTFE tape to make a good seal between the stainless and copper threads. Overall, I’m very happy with my purchase.
Jeff Jones (verified owner) –
A perfect fit, absolute must have if you want to use a keg boiler. Very happy with the product, service, and overall experience!!