2 inch Tan Gum Rubber Bung Pre-Drilled No. 10.5 
2 Inch Copper Mighty Mini Dual Purpose Tower 
Mile Hi Cinnamon Essence (50ml) 
Copper 6 Inch Diameter Mile Hi Flute - 6 Sections 
Mile Hi Stainless Replacement Water Heater Element 120V 2000W 
Strainer, Stainless Steel with Handle 
2 Inch Ferrule Cap Half Inch Female NPT 
3 Inch Diameter Sight Glass with TriClamp Ends 
16 Gallon Still with 3 Inch Stainless Torpedo 
Mr. Distiller Carbon Filter Collection System 
Bombay Dry Gin Essence - Liquor Quik (20ml) 
Rye Malt - 50lbs 
Oak Chips - Light Toast 
8 Gallon with 3 Inch Stainless Torpedo Pro 
Turbo Clear 2-Stage Clearing Agent 
Premium Quality Activated Stone Carbon 1.5lb 
53 Gallon Copper 4 Inch Diameter Mile Hi Flute 6 Sections 
3 Inch Stainless Thumper Assembly for 8 Gallon to 16 Gallon Thumper Connection 
2 Inch x 12 Inch Tall Stainless Steel Column Extension, Includes Clamp and Gasket. 
Spanish Cedar Infusion Spiral (Light Toast) 
Coconut Rum Essence - Liquor Quik (20ml) 
Spiced Bourbon Essence - Liquor Quik (20ml) 
10 PSI Safety Valve with 2" x 1/2" Adapter 
Ouzo Essence - Top Shelf (50ml) 
Portable PH Meter 
White Ash Flavor Oak Aging Honey Comb Stick 
48 Hour Turbo Yeast (2.2 LB) 
2 Inch Ferrule Cap with 1 Inch Female NPT 
3 Inch Copper Bubble Cap Plate. Includes Bubble Plate Gasket 
2 Inch Stainless Mighty Mini Pro Tower 
2 Inch Copper Pot Still Tower 
5 PSI Safety Valve with 2" x 1/2" Adapter 
4 Inch Mile Hi Flute Dephlegmator 
26 Gallon Heavy Duty Milk Can with Dome Lid and Clamp, Butterfly Valve Drain, 2 Inch Filler Neck, and Two Tri-Clamp Ports for Heating Elements 
Description
53 Gallon Stainless jacketed Kettle with all the fittings. Made of 304 stainless. See list of fittings below. A perfect solution to distill on the grain or with fruit or any solids in the kettle. The jacket creates an indirect heat so softer heat that wont burn or scorch the solids.
ATTENTION:
THESE BOILERS ARE MADE TO ORDER, AND ABOUT 4-6 MONTHS ON LEAD TIME.
Fittings on jacketed kettle include;
- 8” tri-clamp on top
- Two 2” tri-clamp ferrules into jacket for entry of steam and drain port.
- One 6" clean out on top of the vessel
- One 2" tri-clamp fitting for fill port or viewing window.
- Two ½” female pipe couplings for thermometer probes. One for the jacket and one for inner pot.
- Two handles one on each side for moving and handling
- Thick stainless skirt so kettle sit directly on the floor
Does not include clamps, gaskets, end caps, safety valve, and threaded fittings. All loose fittings will need to be purchased separately.
Dimensions; Approximately 33” diameter and 40" tall
Capacity is 53 gallons
Made with 304 stainless steel
Please allow up to two weeks to ship. This boiler ships by freight truck.
Additional rates on shipping may apply for orders that require liftgate assistance and residential locations.
Reviews
There are no reviews yet.